A kitchen faces heat, steam, water and daily use. Choosing the right material for each part decides whether it still looks and works well years later.
1. Carcass (the cabinet body)
Use waterproof (BWP / marine grade) plywood for the carcass, especially the sink unit and base cabinets, where leaks and humidity are most likely. See our guide to checking genuine plywood before you buy.
2. Shutters
- Laminate on plywood or MDF: wide range of colours and textures, easy to maintain and cost-friendly. See how to choose laminates.
- Pre-laminated or painted MDF: smooth designs and routed patterns; choose water-resistant MDF.
- Glass shutters: printed or coloured glass fronts give a premium look. Use toughened glass for safety.
3. Backsplash
The wall behind the hob and sink takes splashes and oil. Printed or coloured toughened glass is easy to wipe and available in many designs. Our UV glass printing service can add patterns, and glass cut-outs for switches and sockets are done before toughening.
4. Countertop and edges
Choose a surface that handles heat and water. Whatever you pick, seal edges and joints properly so moisture does not enter the board below.
5. Hardware
Hinges, drawer channels and handles are used every day, so quality matters more here than anywhere. Read our kitchen and wardrobe hardware guide and see items on the hardware page.
6. Plan ventilation and lighting
Good ventilation protects boards and finishes from steam. Plan lighting under wall cabinets, and keep gaps around appliances so heat does not damage laminates.
Where to buy in Dindigul
Ambika Plywoods supplies plywood, MDF, laminates, glass and hardware under one roof, so you can match every part of the kitchen. Call +91 97871 50990 for advice.
